A Colex GRP Water Tank is a high-quality water storage tank made from Glass Reinforced Plastic (GRP), designed and supplied by Colex Tanks Trading LLC. . Colex GRP tanks are widely used as GRP water tanks in UAE due to their durability and hygiene. For residential, commercial and industrial applications are choosing GRP water tanks for their water storage needs. They are commonly available as GRP sectional water tanks for large projects
GRP water tanks from Colex are known for their strength, durability, and resistance to corrosion, making them one of the most reliable water storage solutions for the UAE climate.
※ The design criteria of water tanks are safeness, hygiene, and convenience.
Internal Reinforcement System
External Reinforcement System
※ Outstanding durability and hygiene. Easy maintenance and repair.
| ITEM | UNIT | PHYSICAL PROPERTIES | KS STANDARD |
|---|---|---|---|
| Gravity | - | 1.85 | - |
| Tensile Strength | Mpa (kgf/mm²) | 102.9(10.5) | 60(6.12)↑ |
| Flexural Strength | Mpa (kgf/mm²) | 151 | 80(8.16)↑ |
| Flexural Modular | Mpa (kgf/mm²) | 17,100 | 6000(612.24)↑ |
| Absorbtion | % | 0.6 | 1↓ |
| Barcol Hardness | - | 58 | 30↑ |
| Thermal Conductivity | - | 2.0X105 | - |
| Distortion | - | 2.0X105 | - |
Designed to restrain distortion from hydrostatic pressure. Maximum distortion rate of wall panel after 48 hours of full tank is less than 1.0% of the total height of the water tank.
Designed to withstand 60kg/m² of snow load.
Designed to KH=1/3G
Designed to withstand 100kg of water poured into the tank with no leakage, with a 100mm diameter flange installed on the internal slide of the wall of a full tank and props on the bottom part of the pipes every 70cm.
Designed to withstand wind at a 60m/sec speed maximum, even when the tank is not filled with water.
SMC insulated panels are made from applying polyurethane, an efficient insulator on a single-layer panel, and covering with a special synthetic resin foamer, creating a sandwich-like structure panel with high insulation performance.
SMC water tanks have outstanding insulation and a dew-proof as triple sandwich structure. Because single panel with heat retention which has 250 times the conductivity more than other metals (STEEL, SUS, etc.) is laid, and polyurethane foam with excellent insulation effect is inserted as lagging. Lastly, a special cover made of synthetic resin vacuum-molded is put on.
The design criteria of water tanks are safety, hygiene, and convinience.
Outstanding strength, durability, water tightness, appearance, and safe structural design. SMC water tank strengths are gained by connecting the panels with stainless steel tie rods from the inside of the tank.
Outstanding durability and hygiene. Easy maintenance and repair
Joints of the wall panel are sustained with vertical external reinforcer frames. The roof panel is sustained with tie rods and pipes. The bottom panels are connected to each other with bolts through brackets.
1. Applied stability and semi-permanent bottom panel with improved weakness
2. Safety upgraded by 100% by improving water flow.
We provide satisfying products with no leaks and no other defects.
One water tank is a limited space creates an effect of installing multiple tanks, which is an economical alternative and efficient for maintenance.
Maximize volume in a limited space: The partitioned water tank can maximize the tank volume compared to installing separate water tanks, especially for limited spaces, such as a basement or small areas.
Precautions when cleaning: One of tank must maintain less than 50% of the water level for safety when cleaning the other tank.
Easy Maintenance: Two tanks are installed as one, which enables easy maintenance and does not require a water supply cutoff for cleaning.
Economical: The partition water tank is more cost-effective, including the cost for labor work, and installing separate tanks for different purposes.
Various Stage : When a partition is applied, one tank can be utilized as a potable water tank, and the other for utility water (for fire hydrant).
If tanks for two different uses are needed in a limited area or boiler room, a 16ton partition type tank can be installed to use half for potable water 8ton for utility water. 8ton however, if two separate tanks are installed instead it need 1 meter distance between the two tank. So each tank capacity is only 6ton.
Refer GRP tank installation and maintenance services to know more
The UAE experiences extreme heat, high humidity, and strong sunlight. Colex GRP water tanks are designed to perform well under these conditions.
GRP material withstands high temperatures
No corrosion in humid environments
Insulated options protect water from heat exposure
Suitable for both indoor and outdoor installations
For rooftop or outdoor installations, Colex insulated GRP water tanks are strongly recommended to maintain water temperature and quality.
Learn how GRP compares with other materials in our GRP tank vs steel tank vs polyethylene guide
GRP sectional tanks are custom-engineered products, not one-size-fits-all items.
Displaying fixed prices for all tank sizes can be misleading.
To ensure accuracy, we:
Assess your exact capacity requirement
Consider site and installation conditions
Recommend the most cost-effective solution
This allows us to provide you with the best price and correct specification, without unnecessary cost.
We specialize in a wide range of GRP water tank services, including residential, commercial, and industrial projects.
A GRP (Glass Reinforced Plastic) water tank is a strong, lightweight, and corrosion-resistant tank used for safe and durable water storage. It is ideal for residential, commercial, and industrial use.
Colex GRP tanks are made using advanced Korean technology and strict quality standards. They are durable, hygienic, UV-resistant, and designed for long-term performance in all weather conditions.
Colex GRP water tanks are available in a wide range of sizes and modular panel configurations, from small domestic units to large industrial tanks. We can customize the tank capacity to suit your project requirements.
With proper maintenance, a Colex GRP tank can last a long time with proper maintenance. The material is corrosion-free and resistant to environmental damage, ensuring long life and reliability.
Yes, we can design and supply GRP tanks according to your specific capacity, space, and project requirements. Our team will assist you from design to installation.
Colex Korea Co. Ltd904, 85, Yongdong-Ro,Uichang-Gu, Changwon-Si,Gyeongsangnam-Do,Republic Of Korea, 51139
Copyright © Colex 2024 All Rights Reserved.
